Crankshaft, Main Bearings and Flywheel/Pulley (with front PTO) CTM3274 (01JUL99) 15-10 Saran Liter Engines 060799 PN=107 VIBRATION DAMPER OR PULLEY REMOVAL (ENGINE WITH FRONT PTO) 1. Remove the eight cap screws (A) attaching damper or pulley to collet. 2. Using a wooden block and a hammer, tap on inner damper ring or pulley until it loosens from conical seat of collet. IMPORTANT: Never tap or apply thrust to outer ring of torsion damper. 3. Remove collet attaching cap screw (B). -UN-22FEB99 4. Remove collet and damper or pulley. A—Cap screw (Qty:
8) CD30710 B—Cap screw C—Pulley D—Collet drive E—Wear sleeve F—O-ring G—Crankshaft H—Gear J—Oil deflector K—Front oil seal L—Timing gear cover -UN-05OCT94 CD30008 CD,3274,G15,5 -19-04JAN99 15 10