Lubrication System/Oil Cooler CTM3274 (01JUL99) 25-18 Saran Liter Engines 060799 PN=179 STANDARD OIL COOLER/OIL FILTER BRACKETS REPLACEMENT A. Engine without camshaft-gear-driven auxiliary drive and bracket installed on sloped base of cylinder block. 1. Remove oil filter bracket (A) and oil cooler bracket (B). 2. Clean and check parts. 3. Install oil cooler bracket (B) with a new O-ring (C). Tighten adapter (D) to 35 N·m (25 lb-ft). 4. Install oil filter bracket (A) with O-rings (G). Tighten cap screws (3 used) to 50 N·m (35 lb-ft). NOTE: Apply sealing compound on thread of cap screw (H). -UN-25OCT94 5. Install new packing (J) between oil cooler and bracket. 6.
Attach oil cooler with holding screw (K), cover (M) and O-rings (L) and (N). Tighten to 35 N·m (25 lb-ft). CD30408 7. Connect coolant lines to oil cooler. 8. Install oil filter adapter (P). Tighten to 45 N·m (33 A—Oil filter bracket lb-ft). B—Oil cooler bracket C—O-ring D—Adapter E—Washer F—O-ring G—O-rings H—Cap screw (to be installed with sealing compound) J—Packing K—Holding screw L—O-ring M—Cover N—O-ring P—Adapter CD,3274,G25,9 -19-01FEB94 25 18