Lubrication System/Oil Cooler HIGH-FLOW OIL COOLER REMOVAL 1. Drain oil cooler at coolant drain plug (F). 2. Disconnect coolant lines and remove the two banjo bolts. CD30281 -UN-06MAR95 3. Remove oil cooler from its support. 4. Check that water passage through cooler is not restricted by scale or dirt. A—Distributor base B—Oil lines C—Oil cooler D—Banjo bolts E—Coolant connections F—Coolant drain plug G—Oil filter CD,3274,G25,12 -19-01FEB94 OIL COOLER DISTRIBUTOR BASE REPAIR 1. Remove oil cooler relief valve (A) and inspect for damage. 2. Replace valve if necessary. CD30020 -UN-07MAR95 3. Install relief valve.
CD,3274,G25,15 -19-30MAR92 CTM3274 (01JUL99) 25-22 Saran Liter Engines 060799 PN=183 OIL COOLER DISTRIBUTOR BASE REMOVAL 1. Disconnect oil lines (A). -UN-06MAR95 2. Remove holding screw (B) and lift out distributor base (C). 3. Discard packing. CD30283 CD,3274,G25,14 -19-04AUG92 25 22