Lubrication System/Dipstick Guide DIPSTICK GUIDE REPLACEMENT A. Dipstick guide fastened onto cylinder block 1. Loosen lock nut and unscrew dipstick guide. 2. Apply sealing compound on thread of new guide. 3. Install new dipstick guide and adjust height (X) in accordance with specifications. Z20746 -UN-08MAR95 CD,3274,G25,20 -19-01FEB94 CTM3274 (01JUL99) 25-25 Saran Liter Engines 060799 PN=186 B. Dipstick guide fastened onto oil pan NOTE: This type of dipstick guide acts also as oil filler neck. -UN-10MAY95 1. Remove dipstick guide. 2. Clean oil pan sealing surface. 3. Apply a bead of LOCTITE® 515 Sealant, then install a CD30414 new dipstick guide. NOTE:
A tube of LOCTITE® 515 Sealant is provided with overhaul gasket set. This tube is also available under part number DD15664. 4. Tighten cap screws to 50 N·m (35 lb-ft). LOCTITE® is a registered trademark of Loctite Corporation. CD,3274,G25,38 -19-04JAN99 25 25