Lubrication System/High-Flow Oil Pump HIGH-FLOW OIL PUMP INSTALLATION CD30418 -UN-10MAY95 1—Cylinder block O-ring 4—Drive shaft 7—Outlet tube 10—Cap screws (2 used) 2—O-ring (outlet tube) 5—Gears 8—Strainer 11—Drive gear 3—O-ring (strainer tube) 6—Housing 9—Pump cover 12—Nut CD,3274,G25,34 -19-01FEB94 CTM3274 (01JUL99) 25-35 Saran Liter Engines 060799 PN=196 1. Install new O-rings in cylinder block, pump housing (for outlet tube) and on oil strainer tube. 2. Install drive shaft with gear and idler gear in pump housing. Both gears must turn freely. -UN-07MAR95 3. Install outlet tube, strainer and pump cover. CD7181 CD,3274,G25,41 -19-01FEB94 25 35