Cooling System/Fan installation on 2054/2254 combines CTM3274 (01JUL99) 30-25 Saran Liter Engines 060799 PN=224 INSTALL ENGINE FAN PULLEY ON 2054 AND 2254 COMBINES (WITH CD6060HZ001 ENGINES) 1. Press bearing shaft (A) into fan bracket (B) until bearing face is flush with bracket end face. 2. Place fan bracket under a press so that the thrust when pressing on pulley is received only by the bearing shaft end (F). Press pulley until the distance (G) is obtained. Distance (G) . . . . . . . . . . . . . . . . . . . . . . . 174.5 mm (6.87 in.) 3. Install fan bracket onto engine. Tighten as follows: Cap screws (E) . . . . . . . . . . . . . . . . . . . . . . 300 N·m (220 lb-ft) Nuts (D) . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 50 N·m (35 lb-ft) -UN-23FEB99 CD30721 -UN-22FEB99 CD30722 CD,3274,G30,49 -19-04JAN99 30 25