Air Intake and Exhaust System/Turbocharger TURBOCHARGER REMOVAL 1. Thoroughly clean exterior of turbocharger and surrounding area. 2. Remove muffler extension and muffler elbow. CD30427 -UN-10MAY95 3. Disconnect oil inlet line (A) and return line (B) and plug immediately. Remove air cleaner to turbocharger hose. IMPORTANT: Immediately plug all openings to prevent dirt from entering the turbocharger. 4. Remove the four cap screws (C) and lift out turbocharger assembly. CD,3274,G35,5 -19-01FEB94 CTM3274 (01JUL99) 35-8 Saran Liter Engines 060799 PN=237 RADIAL BEARING END PLAY CHECK (GARRETT TURBOCHARGER) 1.
Using an adapter with indicator extension rod, fasten a dial indicator to the turbocharger and place indicator -UN-23MAY95 rod against compressor shaft through lube hole. 2. Move shaft alternately toward and away from indicator. CD7195 3. Applying equal pressure to both ends of shaft, range of travel should not exceed: —TA25: 0.06—0.13 mm (0.0024—0.005 in.) —TA31: 0.08—0.18 mm (0.003—0.007 in.) —TA34: 0.08—0.18 mm (0.003—0.007 in.) —TA38: 0.08—0.18 mm (0.003—0.007 in.) —T300: 0.08—0.18 mm (0.003—0.007 in.) —T350: 0.08—0.18 mm (0.003—0.007 in.) CD,3274,G35,6 -19-01FEB94 35 8