Air Intake and Exhaust System/GARRETT Turbocharger TURBOCHARGER REASSEMBLY 1. Attach compressor housing (A) to center housing/rotating shaft assembly (B) with cap screws, lock plates and clamps or with snap ring. Use the locating marks made during disassembly, orientate compressor housing to center housing and tighten cap screws (E) to: CD30182 -UN-07MAR95 CD30181 -UN-07MAR95 • Models TA31, TA34, TA38 . . . . . . . . . . . . . . . . 17 N·m (12.5 lb-ft) • Models T300, T350 . . . . . . . . . . . . . . . . . . . . . 17 N·m (12.5 lb-ft) 2. Attach turbine housing (C) to center housing (B), correctly orientate the turbine housing and tighten cap screws (D) to: • Model TA25 . . . . . . . . . . . .
. . . . . . . . . . . . . . . 26 N·m (19 lb-ft) • Models TA31, TA34, TA38 . . . . . . . . . . . . . . . . . 18 N·m (13 lb-ft) • Models T300, T350 . . . . . . . . . . . . . . . . . . . . . . 18 N·m (13 lb-ft) Bend all locking tabs against heads of cap screws. 3. If not already performed, prime turbocharger lubrication system prior to installing turbocharger on the engine. Fill center housing with new engine oil through the oil drain hole. Turn the rotating assembly by hand to lubricate the bearings. CD,3274,G35,10 -19-01FEB94 35 11 CTM3274 (01JUL99) 35-11 Saran Liter Engines 060799 PN=240