Fuel System/Fuel Filter RECTANGULAR FUEL FILTER ELEMENT REPLACEMENT NOTE: For proper filter servicing and replacement, see Operator’s Manual. Remove drain plug and drain filter. CD7201 -UN-26JUL89 CD7202 -UN-26JUL89 Release the filter element retaining spring and pull off element. Before installing new filter element, inspect the filter plate where element makes contact. This location must be completely void of dirt or other contaminants. If contaminants are found, clean carefully. IMPORTANT: Any dirt lodged in spring pin groove or at end of spring pin during cleaning will be washed into the injection system. This may result in severe damage to the fuel injection pump or nozzles.
Push new element over the spring pin. Hook the top end of retaining spring first, then hook the bottom end. After changing the element, install and tighten drain plug in filter plate. A—Bleed plug B—Filter element C—Retaining spring Bleed fuel system. D—Drain plug E—Spring pin CD,3274,G40,8 -19-01FEB94 40 24 CTM3274 (01JUL99) 40-24 Saran Liter Engines 060799 PN=269