Fuel System/MICO In-line Fuel Injection Pump ASSEMBLE MICO FUEL SUPPLY PUMP IMPORTANT: Hands should be wet with diesel fuel when assembling internal components of fuel supply pump. 1. Install new seal (C) into pump housing (B) using JDF15 Driver (A). Be sure seal is started straight in housing bore and drive until driver contacts housing. CD30728 -UN-22FEB99 2. To assemble supply pump, reverse disassembly procedure using new seal washers. CD,3274,G40,81 -19-04JAN99 CTM3274 (01JUL99) 40-40 Saran Liter Engines 060799 PN=285 INSTALL FUEL SUPPLY PUMP ON IN-LINE FUEL INJECTION PUMP 1. Install a new gasket on injection pump flange. 2. Position pump over mounting studs.
Tighten nuts to 5—7 N·m (4—5 lb-ft). 3. Install fuel inlet (A) and outlet (B) lines. Tighten banjo screws to 25 N·m (18 lb-ft). 4. Bleed fuel system. -UN-23FEB99 CD30729 CD,3274,G40,82 -19-04JAN99 40 40