Cyl. Block, Liners, Pistons & Rods/Cylinder block BALANCER SHAFT BUSHING REPLACEMENT 1. Drive unserviceable bushings out of cylinder block using JD-249 bushing driver. 2. Drive new bushings into cylinder block using JD-249 bushing driver. CD7114 -UN-18JAN95 CD30390 -UN-10MAY95 IMPORTANT: Make sure oil holes in bushing and cylinder block are aligned except for engines without balancer shafts where the bushings must be oriented (B) to block the oil galleries (A). NOTE: Bushing-to-balancer shaft clearance is correct if shaft can be rotated by hand with a slight to moderate drag.
10 18 A—Oil gallery B—Bushing oriented to block oil gallery CD,3274,G10,43 -19-01FEB94 CTM3274 (01JUL99) 10-18 Saran Liter Engines 060799 PN=79