Cyl. Block, Liners, Pistons & Rods/Connecting rod CONNECTING ROD BUSHING REPLACEMENT (STRAIGHT PIN-END CONROD EXCEPT SMALL PIN) 1. Push bushing out of connecting rod using following tools: • JD-286 Driver for large pin on engines with straight pin-end • JDE88 Driver for medium pin on engines with straight pin-end CD7122 -UN-18JAN95 2. Install new bushing using same tool as for removal. Straight pin-end IMPORTANT: Oil holes (A) MUST be aligned. If holes are not aligned, remove and discard bushing then re-install a NEW bushing. DO NOT attempt to reuse a bushing. 3. Have the new bushing reamed by a specialized workshop to obtain specified oil clearance with piston pin.
10 24 CD,3274,G10,4 -19-04JAN99 CTM3274 (01JUL99) 10-24 Saran Liter Engines 060799 PN=85