Cyl. Block, Liners, Pistons & Rods/Complete final assembly CTM3274 (01JUL99) 10-36 Saran Liter Engines 060799 PN=97 4. Service cylinder block may have additional side mounting bosses (A). In case where these bosses interfere with the chassis or other machine components, grind concerned area. IMPORTANT: Be sure, when grinding, that particles -UN-10DEC96 do not enter dipstick hole (B). CD551P1 CD,CTM125,076 -19-01DEC97 10 36 5. Oil gallery ball (A) is provided with service cylinder block, but may not be installed. In this case, proceed as follows: • Put ball (A) in oil passage (B). • Drive in ball using an appropriate driver (C) until ball bottoms. • Check for proper installation.
The distance between pan rail and top of ball should be approximatively 54 mm (2.16 in.). -UN-07NOV96 CD551P5 CD,CTM125,077 -19-01DEC97