PERIODIC SERVICE 40 JACK-UP POINT To avoid personal injury, death or vehicle damage: A Do not work under the vehicle unless it is secured by safe stands or suitable blocking. B Front End Jack up at the front bumper only. (1) Safety support (2) Latch slot 5. To lower the cargo bed, raise the cargo bed slightly using the handgrip. 6. Release the safety support from the latch slot by pulling up on the middle of the support. 7. Put the safety support into the support holder. (1) Front bumper (2) Jack (3) Wooden block B Rear End Jack up the rear side after placing a wooden block under the transmission bottom cover for securing the engine and then supporting it.
Do not jack it up supporting the steel plate portion under the transmission bottom cover directly. (1) Support holder 8. Slowly lower the cargo bed onto the frame and set the latches on both sides. (1) Transmission bottom cover (2) Jack (3) Wooden block