PERIODIC SERVICE 58 B Changing Engine Oil To avoid personal injury: A Be sure to stop the engine before changing the oil. A Allow engine to cool down sufficiently, oil can be hot and can burn. 1. Park the vehicle on a flat surface and raise the cargo bed. Shut off the engine and remove the key. 2. To drain the used oil, remove the drain plug at the bottom of the engine and completely drain the oil into an oil pan. All the used oil can be drained out easily when the engine is still warm. 3. After draining, reinstall the drain plug. 4. Fill with the new oil up to the upper notch on the dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in "MAINTENANCE" section.) (1) Drain plug (1) Oil inlet (2) Dipstick (A) Oil level is acceptable within this range Oil capacity [Filter exchanged] 1.35 L (1.43 U.S.qts.) [Filter non-exchanged] 1.2 L (1.27 U.S.qts.)