207 207 GROUND DRIVE CONTROL 214-589 GROUND DRIVE CONTROL REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 214-614 1 PUSH BUTTON SWITCH (SPST) OFF-(ON) 2. 106-820 8 SCREW, SELF TAPPING (3.0 X 12MM) 3. 305-664 1 JOY STICK ADAPTER 4. 274-998 1 DECAL 5. 214-615 1 KILL SWITCH 6. 157-040 1 O-RING (-016 D90) 7. 214-613 1 JOYSTICK ASSEMBLY SEE FOOTNOTE 1 8. 157-017 1 O-RING (.018 D90) 9 . 149-558 1 JOYSTICK GASKET SEE FOOTNOTE 1 215-1394 1 JOYSTICK ASSEMBLY 10. 214-728 2 TOGGLE SWITCH HALF BOOT (SEAL) 11. 215-1720 1 DIODE 1N5402 12. 105-775 1 D-RING 13. 211-020 1 COILED CORD-MALE 14. 211-021 1 STRAIN RELIEF 15. 106-876 6 SCREW 16. 214-497 1 LOWER HOUSING 17. 214-498 1 UPPER HOUSING 18.
116-933 1 HANDLE 106-894 2 SCREW (#8-32 X 1" PLPS SS) 19. 157-039 2 O-RING (-014 D90) 20. 217-896 1 TOGGLE SWITCH 21. 214-570 1 TOGGLE SWITCH (DPDT) ON-OFF-ON 22. 116-549 AR ROPE GASKET ( USE 27" ) 23. 116-932 1 JOYSTICK KNOB SEE FOOTNOTE 2 NOT SHOWN: FOOTNOTES: 1. JOYSTICK SHOULD BE ORIENTED WITH LABLE POINTING TOWARDS CABLE END. (REV G) 1. JOYSTICK SHOULD BE ORIENTED WITH X+ ON LABLE POINTING TOWARDS CABLE END. (REV H) Y-AXIS OUTPUT: 3.75V FORWARD 1.25V BACK X-AXIS OUTPUT: 3.75V LEFT 1.25V RIGHT 2. APPLY THREAD LOCKING COMPOUND TO BOTH HANDLE SCREWS. NOTE: 05 ID0186069