271 271 PIPE SHUTTLE FRONT REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 307-769 1 GRIPPER PLATE 2. 313-433 1 FRONT GRIPPER 3. 370-154 1 ROLLER 4. 105-507 1 ROLL PIN (3/8" X 2") 5. 313-444 1 STANDARD NOSE PIECE 6. 106-378 1 FLG LK SCREW (M6-1.00 X 12MM) 7. 354-376 1 PIN 8. 191-161 1 GRIPPER CYLINDER 11. 105-178 1 BOLT (5/16-NC X 2-1/2", GD8) 10. 105-089 1 LOCKNUT (5/16-NC) 9. 106-076 1 WASHER (1/4") SEE FOOTNOTE 1 12. 105-110 1 BOLT (1/2-NC X 4-1/2") 13. 105-047 5 LOCKNUT (3/8-NC) 16. 107-691 3 SCRW (3/8-NC X 2-1/2",CSK SOC) 15. 105-300 1 BOLT (1/2-NC X 3-1/4") 14. 313-443 1 COBBLE NOSE PIECE 18. 183-411 2 COTTERLESS HITCH PIN (.5" X 2") 17. 105-098 2 BOLT (3/8-NC X 3") 19.
354-354 1 SPACER 20. 313-416 1 FRONT SHUTTLE 21. 179-141 1 PIVOT PIN 22. 115-503 2 KLIP RING (.750") 23. 125-424 1 BRONZE BUSHING (.750") 24. 313-445 1 AUXILIARY PIPE LOADER 25. 313-466 1 AUXILIARY SLIDE PLATE 26. 106-301 2 LOCK NUT (1/2-NC, NLK) 27. 313-446 1 ADJUSTABLE SUPPORT BAR 28. 313-467 1 AUXILIARY SLIDE PLATE 29. 106-640 16 BOLT (M6-1.00 X 20MM, BUT SOC) 30. 106-237 16 LOCKNUT (M6-1.00,PRV TRQ,NLK) 31. 125-137 2 BALL BEARING (.375") 32. 313-487 1 WEAR PAD NOT SHOWN: FOOTNOTES: 1. BOLT WILL BE INSTALLED IN THE UPPER HOLE AS SHOWN WITH REF NO. 5 AND WILL BE INSTALLED IN THE LOWER HOLE WITH REF NO. 14. NOTE: 01 ID0148955