8 Mounting/removing front attachment 8.2 Installing the front attachment 67084 8.2 Installing the front attachment 70747 8.2.1 Suspending front attachment Observe the general warnings at the beginning of the Fitting / removing the front attachment chapter. Fitting / adjusting mounting plates (3) On machines fitted with AUTO-CONTOUR sys- tem, align the coupling lug (1) with the front attachment. Slowly approach the front attachment with the machine until the coupling lug (1) is positioned beneath the pockets (2). Raise the front attachment with the feed rake conveyor. Apply the parking brake of the machine and stop the engine.
2 1 3 19522 1 If provided, swing rubber blanket (1) over and place it on the feed rake conveyor. If provided, swing plate (2) over the intake auger. 2 1 2 24848 70751 8.2.2 Interlocking the front attachment Observe the general warnings at the beginning of the Fitting / removing the front attachment chapter. DANGER! The front attachment is not sufficiently secured. Death or serious injury. Comply precisely with procedure instructions. Check the safe locking of the front attachment. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 127