8 Mounting/removing front attachment 8.3 Removing the front attachment 67084 Place universal drive shaft in holder (1). Hang in chains (2) as short as possible. 2 1 2 24506 25 71365 8.3.5 Unlocking the front attachment Observe the general warnings at the beginning of the Fitting / removing the front attachment chapter. Pull out cotter pin (1). Pull lock pin (2) out of the feeder unit of the machine, using lever (3). Shift lever (3) all the way to the outside and secure in that position by means of cotter pin (1) at (A). 3 1 2 A 26 19523 only front attachments and machines equipped with AUTO-CONTOUR: Pull out lever (1) and swing lever (2) up to position (A).
Lever (1) does not engage in that position. A 1 2 24849 27 Repeat this procedure on the other side of the machine. 71375 8.3.6 Unhitching front attachment Observe the general warnings at the beginning of the Fitting / removing the front attachment chapter. 136 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09