9 Driving and transportation 9.3 Chassis 67085 Depress the clutch pedal (5) fully. Using the shift lever (4), adjust the machine to the desired switch position. 5 19458 29 Release parking brake if required. After the gear has been engaged, release pedals of foot brake and slowly release the clutch pedal. Take the foot off of the clutch pedal (5), thus avoiding unnecessary clutch drag. 4 N The clutch engages and the machine starts off. 2 3 R 1 Note! 30 Shift lever locks during shifting. Gear is difficult to engage. 19457 Release parking brake if required. Release foot brake pedals. Slowly release the clutch pedal. Depress the clutch pedal fully. Depress the foot brake pedals downwards.
Set shift lever to desired shift position. 80261 9.3.5 Adjusting the ground speed control lever actuating resistance (DOMINATOR 150 / 140) Observe the general warnings at the beginning of the "Driving and transportation" chapter. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 153 Gear Designation N Neutral position R Reverse gear 1 1st gear Fieldwork gear 2 2nd gear Fieldwork gear / road gear 3 3rd gear Road gear