1 Introduction 1.1 General Information 67077 References can easily be distinguished by suitable symbols. The following symbols are distinguished: Document structure based on subassemblies As far as the contents permit, the chapters of this man- ual are structured according to subassemblies. The structure of these subassemblies is the same in all chapters. Different product groups have different document structures based on subassemblies. CLAAS always takes care to keep these document structures based on subassemblies identical in any documents.
Search and find The wanted subject can easily be found with the recur- ring subassembly structure, using the table of contents or the header line of this manual. In addition, the index of this manual is a useful tool for locating a specific subject. The index can be found on the last pages of this manual. Directions Text elements such as front, rear, right and left always apply to the direction of travel. In figures, the direction of travel may be indicated by a direction arrow. Optional equipment and accessories Optional equipment includes equipment variants of the machine where different variants are available, but only one variant can be fitted.
Accessories are equipment items that may be addi- tionally fitted to the machine, but are not included in the standard scope of the machine. Both terms designate possible variants. Standard scopes and equipment variants may differ in other countries. Your CLAAS Service Department 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 17 Symbol Meaning Description See index The symbol indicates that further information on this subject can be found at another point in this manual. See index of the relevant Operator's manual The symbol indicates that further information on this subject can be found in the Operator's manual of that machine or equipment.