10 Fieldwork settings 10.5 Cleaning unit 67086 Adjust the sensitivity of the sensors to the different grain sizes on switch (4). The sensors react more / less sensitively, depending on the pre-set grain size. 4 2 1 3 10789 17 82957 10.5.3 Removing the sieves The sieves must / can be installed / removed as a function of the crop to be harvested. See threshing chart, see sieve chart. The sieves can be removed / installed independently of one another. The straw chopper can be shifted to the rear as far as possible. In this installation position, the sieves can be mounted. See straw chopper sieves installation position.
Observe the general warnings at the beginning of the "Fieldwork settings" chapter. Removing the upper sieves Unscrew bolts (1). Remove bolts (2). Pull out the upper sieve to the rear. 2 2 1 1 19638 18 Removing the lower sieves (machines with performance monitor) Unscrew bolts (1). Fold sensor (2) down. 2 1 1 19 19638 182 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 Sensitivity of sensors Position Grain sizes 1 for lightweight grains 2 for medium-weight grains 3 for heavy grains