11 Fieldwork 11.4 Front attachment 67087 11.4 Front attachment 82054 11.4.1 Adjusting the reel horizontally (mechanically) Raise / lower reel until the reel poles (2) are in a horizontal position. Observe the general warnings at the beginning of the "Fieldwork" chapter. Relieve chain tension. To this end, pull chain down at position (A) as far as possible and fit the spring clip (1) into the front hole. A The spring-loaded cylinder is now blocked. 1 2 2 28386 1 Unlock and pull out pin (1) on both sides. Adjust reel by hand. Insert pin (1) on both sides and secure with spring clip. 3 28387 Tension the chain.
To this end, pull chain down at position (A) as far as possible and fit the spring clip (1) into the rear hole. A The spring-loaded cylinder now keeps the chain under constant tension. 1 4 28386 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 197