11 Fieldwork 11.10 Grain delivery 67087 Warning! Sharp edges and pointed machine parts. 1 Slight injuries. Do not touch sharp edges of the auger flights. Wear safety gloves. 1 Unscrew bolts. Removing / installing the grain tank auger cover plates (1). 19653 86 Note! Performance of necessary installations. Increased time needed. Screw the bolts back in immediately after removing the plates; otherwise the tapped holes will become plugged. Screw in bolts. Fit guard (1). Remove additional safety precautions. 1 87 30205 43957 11.10.7 Clean machine for bulk seed change The machine must be cleaned after each bulk seed change. Engage the threshing mechanism.
Set the diesel engine speed to fast idling speed. Set the threshing drum speed at maximum. Set the cleaning fan speed at maximum. Let machine run about 2 minutes at top idle speed. Stop the threshing mechanism. Stop the diesel engine. Observe the general warnings at the beginning of the "Fieldwork" chapter. Clean the stone trap. Clean the auger troughs. Clean the grain tank. Adjust the machine settings to the crop. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 237