13 Maintenance 13.5 Engine 67089 86264 13.5.16 Changing the fuel filter CATERPILLAR C-6.6 / 3056 E Observe the general warnings at the beginning of the "Maintenance" chapter. Observe the information provided in the operator's manual of the engine manufacturer. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. WARNING: Soiling of fuel system. Machine damage. Make sure surroundings are clean. Use suitable and clean tools.
Ensure that no dirt can enter the fuel system. Close the shut-off tap of the fuel system. Unscrew the filter (1). WARNING: Use of unpermissible spare parts or lubricants. 1 Machine damage or increased wear. Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement! The use of genuine CLAAS spare parts and lubricants is recommended. 27 CATERPILLAR C-6.6 27296 Clean the inside of the filter head. Apply some oil to the new seal and screw on new filter (1) until the filter seal touches the filter head. Tighten the filter by hand. Open the shut-off tap of the fuel system. Bleed fuel system. Start the diesel engine.
Let diesel engine run at min. no-load speed for about 10 seconds. Check tightness of fuel filter. 1 28 CATERPILLAR 3056 E 29340 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 289