13 Maintenance 13.5 Engine 67089 86462 13.5.25 Topping up coolant Observe the general warnings at the beginning of the "Maintenance" chapter. Caution Mixing coolants changes their properties. The coolant can flocculate. Engine overheating. Only fill with coolant according to the lubricants chart. Let diesel engine cool down. Ensure that the drain cock of the cooling system is closed. Observe the coolant mixing ratio. Warning! Contact with hot liquids or machine parts. 1 Danger of burns Wear suitable protective clothing. Let liquids or machine parts cool down. Comply with instructions. Unscrew cover (1). Caution! from serial no. ...
29602 48 Temperature difference between coolant and diesel engine. 1 2 Machine damage Let diesel engine cool down. Do not fill cold coolant into the engine when at operating temperature. Fill in coolant at nozzle at (1). from serial no. ... : The coolant level must not exceed the FULL mark (maximum) and not fall below the SAFE mark (minimum) of the container. up to serial no. ... 23479 49 up to serial no. ... : The coolant level must not rise above the filler neck level and not fall below the SAFE mark (sight glass (2)) of the container. Bolt on cover (1). Start the diesel engine and let it run at slow idling speed. Observe the general warnings at the beginning of the "Maintenance" chapter.
Stop the diesel engine. Let diesel engine cool down. Check coolant level one more time and top up if required. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 299