13 Maintenance 13.6 Chassis 67089 Rear axle / rear drive axle Danger! Wheel bolts / wheel nuts may come loose when not tightened as specified. Death or serious injuries! Retighten all wheel bolts / wheel nuts on new machines and when wheels have been removed and refitted. Observe the maintenance intervals: - immediately after installation. - after the first 10 working hours. - after the first 100 working hours. The threads must be clean and free of grease. Tighten wheel bolts / wheel nuts crosswise. Observe the tightening torque.
Rear axle decal 30789 61 39373 13.6.3 Cleaning the surroundings of the drive axle manual gearbox Observe the general warnings at the beginning of the "Maintenance" chapter. Clean surroundings of gearbox on the machine. 62 14198 86778 13.6.4 Checking the final drive oil level DOMINATOR 150 / 140 Park the machine on level ground. Observe the general warnings at the beginning of the "Maintenance" chapter.
308 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 Tightening torque of rear axle wheels / rear drive axle wheels Use Designation of thread, type of fastening Wrench size Tightening torque Rear axle M18 x 1.5 - 8.8, bolt with spring washer C 18.5 DIN 74361 (Limes type conical spring washer) 260 Nm