13 Maintenance 13.6 Chassis 67089 86775 13.6.12 Topping up oil in the drive axle gearbox Park the machine on level ground. Observe the general warnings at the beginning of the "Maintenance" chapter. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. WARNING: Use of unpermissible spare parts or lubricants. Machine damage or increased wear. Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement!
The use of genuine CLAAS spare parts and lubricants is recommended. Caution! Machine operation with unpermitted or pol- luted lubricants. Machine damage. Ensure a clean environment. Use suitable and clean tools. Use permitted lubricants. Lubricants must be free of pollution. Unscrew bolt (1). Fill in new oil. Check oil level , top up if necessary. Remove dirt from bolt (1). Screw in bolt (1) with sealant. 1 71 23390 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 315