13 Maintenance 13.9 Hydraulic system 67089 Observe the general warnings at the beginning of the "Maintenance" chapter. Warning! Contact with hot liquids or machine parts. Danger of burns Wear suitable protective clothing. Let liquids or machine parts cool down. Comply with instructions. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. WARNING: Use of unpermissible spare parts or lubricants. Machine damage or increased wear.
Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement! The use of genuine CLAAS spare parts and lubricants is recommended. Identify the position of the hydraulic oil drain noz- zle in the table and on the machine. The oil drain nozzle is marked on the machine by a hydraulic oil decal.
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 341 DOMINATOR Position of drain hose Engine type 150 140 130 Engine oil Hydraulic oil CATERPILLAR C-6.6 • left machine side, inside left machine side, outside CATERPILLAR C-6.6 • left machine side, inside left machine side, outside CATERPILLAR C-6.6 • left machine side, inside on the steering cylinder CATERPILLAR 3056 E • right machine side left machine side, inside CATERPILLAR 3056 E • right machine side left machine side, inside CATERPILLAR 3056 E • right machine side on the steering cylinder PERKINS 1006-6T • right machine side on the steering cylinder