13 Maintenance 13.12 Feeder unit 67089 Check the tension of the feeder chains (1) on the feed rake conveyor through the flaps (2), with the front attachment installed. 1 The feeder chains are correctly adjusted if the third and fourth feeder bars from the front slightly touch the ground. If necessary adjust the feeder chains. 23851 131 2 132 23852 Adjust the feeder chains. - Loosen nuts (1) and (3) on both sides. - Adjust nut (2) until the chains on both sides are uniformly tensioned. - After tensioning, tighten the nuts (1) and (3) on both sides. - Close flaps.
3 2 1 133 23850 72926 13.12.3 Adjusting the feeder chain slip clutch Observe the general warnings at the beginning of the "Maintenance" chapter. 354 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09