3 Safety 3.3 Safety decals 67079 3.3 Safety decals 859 3.3.1 General information on safety decals The danger zones on the machine or on the front attachment which cannot be eliminated by design or protective measures, are identified by safety decals. These safety decals help to alert persons to hazards which can cause personal injury. The safety decals consist of two components: Part 1 shows the risk of injury in a warning triangle. Part 2 shows how injury and accidents can be pre- vented by appropriate actions. The pictures on the safety decals consist of generally understandable pictograms. As far as possible, the safety decals must be located in close proximity to the hazardous area.
The original CLAAS safety decals are equipped with the CLAAS part number and the date of manufacture. The positioning and meanings of the safety decals are explained below: When ordering, please use the 10-digit CLAAS part number given ahead of every safety decal, the safety decal number given in ( ) shows the correct position of the safety decals in the associ- ated picture, followed by an explanation of the safety decal graphics in text form. Danger! Hazard points on the machine. Death or serious injury! Hazard warning signs / safety decals that are damaged or unrecognisable must be replaced immediately by new ones.
When parts that have hazard warning signs / safety decals are replaced, always make sure to attach the relevant new haz- ard warning signs / safety decals to each new part. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 51