5 Prior to initial operation 5.1 General Information 67081 Chassis Fit the wheels. Check the tyre pressure and correct if necessary. Check condition and permissibility of tyres. If necessary adjust the rear axles / rear wheel drive axles from transport position to working position. If necessary adjust the wheel track for the given tyres. Check tightening values of wheel fixing elements and correct if necessary. Check oil level in all gearboxes and refill if necessary. Brake Check brake fluid level and top up if required. Drives Check all belt tensions and adjust if necessary. Check all safety guards and put them into their correct position, if required.
Check oil level in all gearboxes and top up if necessary. Hydraulic system Check hydraulic oil level and tightness of hydrau- lic system. Electrical / electronic equipment Fill and charge battery, if required. Install fan / air conditioner fuse. If necessary, install side lights in case of excess width. Intake Remove the lift eyes. Fit mounting plates. Check the front attachment float springs. Align the coupling lugs (machines without Auto- Contour) Separation Remove the lift eyes. Grain delivery Close the service aperture on the grain tank unloading tube. Install the grain tank safety device.
Putting the air conditioner into operation (with Sanden compressor) 88 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09