154 Bluetooth ® settings Requirements for a Bluetooth ® connec- tion Pairing a mobile phone The following requirements must be met for the CD radio to detect the mobile phone: Pairing the mobile phone via Bluetooth ® pairing R the mobile phone is located inside the vehi- cle in the vicinity of the CD radio X Press the t button repeatedly until the display shows BT PAIR or BT EXT . X Turn the control knob anti-clockwise. The display shows BT PAIR . Audio systems R the Bluetooth ® function of the CD radio is activated ( Y page 154) R the mobile phone is prepared for pairing Switching the Bluetooth ® function on or off Activating the Bluetooth ® function X To exit the menu:
press the SRC button or wait 10 seconds. X Press and hold the ; button. The display briefly shows BT ON . The Є Bluetooth ® symbol flashes in the display, and the CD radio automatically searches for mobile phones that have already been paired with the CD radio. X To start a search for mobile phones: Press and hold the ; button. The Є Bluetooth ® symbol flashes in the display. The CD radio searches for mobile phones within range for a certain period of time. At the end of the search, a tone sounds. If at least one mobile phone is found, the display briefly shows BT LIST and then the device name(s) of the mobile phone(s).
i The Bluetooth ® function will remain acti- vated until you deactivate it again. If you switch off the CD radio, the Bluetooth ® connection will be ended. If you switch it on, the CD radio re-establishes the con- nection. i If the CD radio does not find a mobile phone, the display briefly shows BT LIST EMPTY . Deactivating the Bluetooth ® function X Press and hold the = button. The display briefly shows BT OFF . The con- nection to the mobile phone is ended. X Select the desired mobile phone using the E or F button. X Press and hold the ; button.