232 Hydraulic connections Hydraulic system Chassis, right : Load-sensing connection Connecting attached equipment with load-sensing connection If you connect attached equipment to the load-sensing connection, the required flow rate for this equipment is controlled automat- ically by the device. The attached equipment is then directly connected to the positioning pump, as soon as you have selected LS in the "Hydraulics" input window ( Y page 237). X Make sure that the engine is switched off. X Connect attached equipment that has a load-sensing connection with individual pressure compensation (see the manufac- turer's operating instructions).
X Perform a safety and function check on the attached equipment (see the manufactur- er's operating instructions).