Menus and input windows in the on-board computer 239 X If necessary, switch the desired hydraulics circuit to standby mode: Changing the value R Working hydraulics circuit ( Y page 244) R Power hydraulics circuit ( Y page 258) The indicator lamp in the corresponding button goes out. The symbol is grey. R Continuous consumers ( Y page 252) R Snow plough load relief ( Y page 248) R Working hydraulics circuit ( Y page 244) R Power hydraulics circuit ( Y page 258) The corresponding symbol is marked with a coloured border. The indicator lamp in the corresponding button flashes.
"Load profile 1" or "Load profile 2" function If you have saved a profile for equipment fit- ted ( Y page 242), you can call up the saved settings again from this profile. The attached equipment is then immediately ready for use. X Press the r or s button to select the desired hydraulic circuit. Hydraulic system X Attached equipment with constant flow rate: change the value. To do so, press the u or t button. or X Equipment with load sensing: press and hold the t button until LS is shown in the input window. Activating a hydraulics circuit X Press the 9 button on the steering wheel or the black button on the control lever until the indicator lamp in the corresponding button lights up.
The corresponding symbol is coloured. Switching the hydraulics circuit back to standby mode X Call up the Working functions menu win- dow ( Y page 236). X Press the r or s button to select an activated hydraulics circuit. X Press the r or s button to select the Load profile 1 or Load profile 2 entry. X Press the 9 button on the steering wheel or the black button on the control lever until the indicator lamp in the corresponding button flashes. The symbol has a coloured border. X Press the 9 button. The saved profile is loaded and the setting values applied. The on-board computer briefly shows the Profile 1 loaded or Profile 2 loaded message in the dis- play.
Deactivating a hydraulics circuit X Deactivate the desired hydraulics circuit using the corresponding button: R Snow plough load relief ( Y page 248) R Continuous consumers ( Y page 252) Z Structural sequence in the on-board com- puter Selection Operation and main- tenance â Hydraulics Working func‐ tions Load profile 1 or Load profile 2