Menus and input windows in the on-board computer 241 If hydraulic connections of the same colour have: R one red mark, then only the hydraulic con- nection with a yellow mark can be control- led. R two red marks, then both hydraulic con- nections are disabled. The symbols of the hydraulic connections are then grey. X Call up the Settings menu window ( Y page 240). X Press the r or s button to select the Limits entry. Hydraulic system X Press the 9 button. The Limits input window appears. X Press the r or s button to select the desired hydraulic connection. X To set a limit: press the u or t button until yellow mark ? is at the desired position.
or X Call up the Settings menu window ( Y page 240). X To disable a hydraulic connection: press and hold the t button until yellow mark ? is at the smallest value. X Release the t button and press again until red mark A appears. X Press the r or s button to select the Function button entry. X Press the 9 button. The Function button selection window appears. X All: press the 9 button. The Working functions menu window closes. X Select the desired function with the r or s button. "Settings," "Function button" menu windows R Working speed : constant working speed mode is activated/deactivated ( Y page 264). You can assign a specific function to the blue button on the control lever.
If you then move the control lever, the red and green hydraulic connections will be controlled. If no function has been assigned and you move the control lever with the blue button pressed, the hydraulic connections will not be controlled. R Equipment function : the equipment can be equipped with an electrical switching function for the hydraulic con- nections (see manufacturer's operating instructions). The electrical switching function for the hydraulic connections can be switched on and off. This way, additional hydraulic connections can be controlled. R Joystick :
if the hydrostatic drive sys- tem has been activated, the vehicle can Z Structural sequence in the on-board com- puter Selection Operation and main- tenance â Hydraulics Working func‐ tions Settings Function button Working speed Equipment func‐ tion Joystick Work Drive