Electrical fuses 327 Electrical fuses X To open: slide the right-hand seat forward. X Open quick-release fasteners = . Retrofitting of additional consumers or elec- trical devices requires special skills. Auxiliary consumers X Remove fuse box lid : . X To close: insert fuse box panel ; . X Pull fuse box panel ; upwards and out. X Attach fuse box lid : . Important safety notes Fuses X Close quick-release fasteners = . X Slide the seat back to the desired position. Blown fuses must be replaced by fuses of the same type, identifiable by the colour and amperage, with the amperages specified in the fuse allocation chart. Further information can be obtained from a Mercedes-Benz Ser- vice Centre.
G WARNING If you manipulate, bridge or replace a faulty fuse with a fuse of a higher amperage, the electric cables could be overloaded. This may result in a fire. There is a risk of an accident and injury. Always replace faulty fuses with specified new fuses of the correct amperage. Breakdown assistance Before replacing a fuse X Turn the key to position 0 in the ignition lock. X Switch off all electrical consumers. Opening/closing the fuse box The fuse box is behind the right-hand seat. Z