330 Compressed-air system Additional FleetBoard fuses Breakdown assistance The additional FleetBoard fuses are located in the fuse box behind the fuse holder. Have blown fuses replaced at a qualified specialist workshop. Compressed-air system Charging the compressed-air system from an outside source In the event of engine damage or lack of res- ervoir pressure, your vehicle can be refilled and supplied with compressed air using the filler connection. This allows the spring-loa- ded parking brake cylinders to be released.
Fuse module FA3 Consumers A F11 32-pin and 11-pin power socket for equipment (termi- nal 15) 10 F12 Central locking terminal 30 15 F13 24-V selectable power sup- ply in roof, terminal 15 15 F14 Lifting cylinder / tempera- ture control for torque con- verter clutch fan (terminal 15) 5 Relay module A31 Description K08 Voltage supply (CAN) valve block K09 Auxiliary heating (engine preheating cut-off at D+) K10 Central locking Fuse module FA302 Consumers A F01 FleetBoard terminal 30 7.5 F02 FleetBoard terminal 15 5 Relay module A32 Description K01 Power hydraulics fan K02 Hydrostatic transmission fan / tor- que converter clutch fan K03 Working hydraulics fan K04 Auxiliary heating K05 Windscreen heating, left K06 Windscreen heating, right Relay module A31 Description K01 Dual-mode steering K02 Rotating beacon (RKL) K03 Immobiliser K04 Mowing door side window heating K05 Refrigerant compressor clutch K06 Heating recirculation pump K07 Auxiliary heating (overriding control blower)