368 Capacities Technical data 3 Vehicles with working hydraulics receive an additional 20 l of hydraulic fluid, since the fan hydraulics and working hydraulics use the same oil reservoir.
Capacity approximately Service product (Sheet Number) Hydrostatic fan, on vehicles with working hydraul- ics3 Initial filling 75.0 l Permissible amount to be removed 35.0 l Working hydraul- ics Initial filling 75.0 l Permissible amount to be removed 35.0 l Power hydraulics Initial filling 52.0 l Permissible amount to be removed 5.0 l Cooling system with heating 4-cylinder engine Total capacity 30.0 l Fresh water with approximately 50% antifreeze (Y page 362) 6-cylinder engine Total capacity 35.0 l 4-cylinder engine Antifreeze to –37 † 15.0 l 6-cylinder engine Antifreeze to –37 † 17.5 l Hydraulic clutch actuation system Expansion tanks As required MB brake fluid DOT 4 plus (331.0) (Y page 361) Lubricating nipple Axle, propel- ler shaft, chassis, etc.
As required Multipurpose grease (267.0) Battery Topping up As required Distilled water