Lighting system 75 indicator lamps next to the light switch light up. i If the vehicle only has a rear foglamp, turn the light switch to the L position and pull the light switch out one level. Combination switch Main-beam headlamps/headlamp flasher Headlamp range control Driver's workstation X Ensure that the key is in position 2 in the ignition lock. X To switch on the main-beam head- lamps: switch on the L dipped-beam headlamps ( Y page 74). The headlamp range control is used to adapt the downward angle of the headlamp beams in accordance with the load on your vehicle. The angle of the headlamp beams changes if the seats are occupied or if the vehicle is loa- ded or unloaded.
This can impair visibility and dazzle oncoming traffic. X Push the combination switch in the direc- tion of arrow ; and engage. The K indicator lamp in the instrument cluster lights up. X To use the headlamp flasher: briefly pull the combination switch in the direction of arrow : . The K indicator lamp in the instrument cluster and the main-beam headlamps light up briefly. X Switch on the dipped-beam headlamps ( Y page 74). X Turn headlamp range control : to the desired position. The road should be illumi- nated from 40 m to 100 m and the dipped- beam headlamps must not dazzle oncom- ing vehicles. Turn signals For an unladen vehicle, use position 0 or 1 depending on the vehicle body. Z