92 Power supply 24 V socket in the centre console Socket on the vehicle exterior Driver's workstation 24 V socket : can be used for accessories, e.g. torches or cigarette lighters. The 24 V socket can carry a maximum load of 360 W. : 24 V, 7-pin power socket for equipment The equipment socket complies with DIN EN 15431. X Make sure that the key in the ignition lock is in position 1 . Sockets on the cab rear wall Equipment socket, 32-pin : Diagnostics connection ; 12 V, 15 A, 3-pin socket with speed signal = 24 V, 25 A, 3-pin socket with speed signal The 3-pin sockets on the cab rear wall comply with DIN EN 15431.
Service personnel can connect the corre- sponding diagnostic testers to diagnostics connection : ( Y page 29). X Switch the 12 V socket on/off ( Y page 91). X Fold swivel bar ; to the left. X Fold socket cap : of the 32-pin equipment socket to the right. Information on pin assignment and changing a fuse can be found in the body/equipment PIN Function 1 Earth connection 2 Tail lamp, left 3 Turn signal, left 4 Unassigned 5 Turn signal, right 6 Tail lamp, right 7 Unassigned