24. SERVICE PROCEDURE 24.6.3 REPLACE STEERING, HOIST OIL TANK AND REAR BRAKE COOLING OIL TANK FILTER ELEMENT WARNING When removing the oil filler cap, turn it slowly to release the internal pressure before removing it. 1. Turn the cap of oil filler F slowly to release the internal pressure, then remove the cap. 2. Remove bolt 1 , then remove cover 2 . 3. Take out the element, then wash the inside of the case and the removed parts. 4. Install the new element, then install cover 2 with bolt 1 .
AE134460 If the filter element clogging caution lamp lights up when the engine water temperature gauge is in the green range and the engine is running at 1200 – 2100 rpm, replace the element immedi- ately. 3-66