TM2361 (24JUN08) 9010-25-15 450DLC Excavator Operation and Tests 062608 PN=311 Tests Engine Oil Pressure Test SPECIFICATIONS Engine Speed Fast Idle Engine Oil Pressure 444 kPa at fast idle –UN–04APR06 4.44 bar at fast idle 65 psi at fast idle SERVICE EQUIPMENT AND TOOLS TX1005815A 1-1/16” Crowsfoot Wrench JT05412 Industrial Universal Pressure Test Kit JT03115 Pressure Gauge NOTE: Before performing test, make sure oil filter is clean. A dirty oil filter will limit the flow of filtered oil. 1. Warm engine to normal operating temperature. 2. Shut off engine. 3. Remove engine oil pressure switch with 1-1/16” crowsfoot wrench. 4.
Install JT03115 gauge, hose, and fitting from universal pressure test kit. 5. Start engine and run at specification. Specification Engine—Speed............................................................................ Fast Idle 6. Record oil pressure. Specification Engine Oil Pressure—Pressure.................................. 444 kPa at fast idle 4.44 bar at fast idle 65 psi at fast idle JC89288,0000199 –19–18APR06–1/1 9010 25 15 SPECIFICATIONS Engine Speed Fast Idle Engine Oil Pressure 444 kPa at fast idle 4.44 bar at fast idle 65 psi at fast idle