TM2361 (24JUN08) 9015-15-21 450DLC Excavator Operation and Tests 062608 PN=465 Sub-System Diagnostics NOTE: For information on diagnosing main controller • Pump 2 Delivery Pressure Sensor (B37) (MCF) circuit malfunctions, see Main Controller • Pump 2 Control Pressure Sensor (B38) (MCF) Diagnostic Trouble Codes (Group • Hydraulic Oil Temperature Sensor (B40) 9001-10.) • Attachment Pressure Sensor (B45) • Counterweight Removal Pressure Sensor (B46) The main controller (MCF) (A3) is the heart of the • Arm Out Pressure Sensor (B50) machine electrical controls.
The MCF interfaces • Arm In Pressure Sensor (B51) directly with inputs (sensors and switches) and outputs • Boom Up Pressure Sensor (B52) (solenoids and an audible alarm). In addition, the MCF • Boom Down Pressure Sensor (B53) communicates information, as needed, with the engine • Bucket Curl Pressure Sensor (B54) control module (ECM) (A1), information controller (ICF) • Bucket Dump Pressure Sensor (B55) (A5), and monitor controller (A4). It does this through • Travel Right Pressure Sensor (B56) the CAN data link.
• Travel Left Pressure Sensor (B57) • Boom Pressure Sensor (B58) For information on the CAN data link, see Controller • Engine Speed Dial (R15) Area Network (CAN) Theory of Operation. (Group • Pilot Shutoff Switch (S3) 9015-15.) • Power Dig Switch (S7) • Auto-Idle Switch (S8) For information on the ECM, see Engine Control • Travel Speed Switch (S11) Module (ECM) Theory of Operation. (Group 9015-15.) • Power Mode Switch (S12) • Reversing Fan Switch (S15) (Optional) For information on the ICF, see Information Controller • Pump Learning Switch (S18) (ICF) Theory of Operation.
(Group 9015-15.) • Boom Mode Switch (S20) • Engine Fluid Level Check Switch (S21) For information on the monitor controller, see Monitor Controller Theory of Operation. (Group 9015-15.) The main controller outputs: The main controller (MCF) receives inputs from the • Travel Alarm (H4) MCF sensors, switches, etc., then sends the • Reversing Fan Solenoid (Y8) (optional) appropriate signals to the MCF outputs (solenoids, • Reversing Fan Solenoid (Y9) (optional; 850DLC) travel alarm, and ECM) to control the following major • Pump 1 Control Solenoid (Y12) systems:
• Pump 2 Control Solenoid (Y13) • Boom flow rate solenoid (Y22) (SF) • Engine Control • Boom mode solenoid (Y23) (SC) • Pump Control • Power dig solenoid (Y24) (SG) • Valve Control • Travel speed solenoid (Y25) (SI) • Miscellaneous Controls Engine Control—The engine control involves the The main controller inputs: following functions:
• A/C Controller (A7) • Engine Speed Dial and ECO Control • Radiator Level Switch (B13) • Power Mode Control • Engine Oil Level Switch (B15) • Travel Speed Increase Control • Swing Pressure Sensor (B33) • Auto-Idle Control • Pump 1 Delivery Pressure Sensor (B35) • Attachment Operation Speed Control • Pump 1 Control Pressure Sensor (B36) Continued on next page CS33148,00008EB –19–28APR06–4/15 9015 15 21