John Deere 450DLC — Service ADVISOR™ Connection Procedure

References Service ADVISOR Connection Procedure 1. Locate service laptop close to machine, or in the cab if diagnostics are to be performed while machine is being operated. LD30992,000048F –19–21MAR06–1/2 TM2361 (24JUN08) 9015-20-11 450DLC Excavator Operation and Tests 062608 PN=501 2. Open left-side compartment behind cab and remove cap from diagnostic connector (1). 3. Connect service laptop to machine using appropriate cables (4 and 5). Methods for connection include: 3MAR06 • Electronic Data Link (EDL) Stand-Alone USB Device –UN–2 • EDL Using Bluetooth • Parallel Data Module (PDM) TX1005090A • PDM with USB Adaptor 4.

Make sure power indicator light displays on EDL or PDM, depending on connection method. If power Service ADVISOR Machine Connection (PDM shown) indicator light does not display, check fuse to 1—Diagnostic Connector diagnostic connector. 2—PDM 3—Service Laptop 5. Turn machine key switch to ON position. 4—PDM to Machine Cable 5—PDM to Service Laptop Cable 6. Refer to Service ADVISOR system instructions to log into service laptop and connect to machine. See Reading Diagnostic Trouble Codes with Service ADVISOR Diagnostic Application. (Group 9015-20.) LD30992,000048F –19–21MAR06–2/2 9015 20 11