John Deere 450DLC — Tech 2 Data Display

TM2361 (24JUN08) 9015-20-25 450DLC Excavator Operation and Tests 062608 PN=515 References 2. Select F1: Data Display from on the Engine Applications Menu. See chart below for data available Engine for display in this option. 3. Display fixed parameters F0: Diagnostic Troubule Codes F1: Data Display 0 to 5 (Max.) Data parameters can be fixed on the F2: Snapshot “Data Display” Screen. Once fixed these parameters F3: Actuator Test will remain at the upper part of the screen until F4: Programming manually removed, even when scrolling. To fix F5: ??KA ID Infomation parameters, press the softkey “Select Items” then move the highlight bar over the desired parameter and press “Enter”.

The selected parameter will be shown with an asterisk (*). Move the highlight bar with the –19–20APR06 arrow up or down keys to select the parameters you want fixed then press the softkey “Accept”. To change fixed parameters press the softkey “Select Items”, move the highlight bar with the arrow up or down keys TX1006490 to select the parameter you want to change and press “Enter”. That parameter will be cleared. Pressing the softkey “Clear All” will clear all fixed parameters. Engine Application Menu 4.

Change units To change units from SI/metric to Standard/English use softkey “more” then select “values”, this will toggle between SI/metric and Standard/English press again and it toggles back.

Tech 2 Data Read out Item Measured in Engine off, key on Engine on, key on System Voltage V 24.8 V 27.0 V Main Relay Voltage V 24.5 V 27.0 V Desired Engine Speed rpm 499 rpm 499 rpm Engine Speed rpm 0 rpm 900 rpm Accelerator Pedal Position 1 Sensor V 0.0 V 0.0 V Accelerator Pedal Position 2 Sensor V 0.0 V 0.0 V Accelerator Pedal Position Signal % 0.0% 0.0% Fuel Rail Pressure Difference (Actual—Desired) MPa -50 MPa 0-1 MPa Fuel Rail Pressure Sensor V 0.9 V 2.0 V Rail Pressure Feedback Mode Wait Mode Feedback Mode Coolant Temperature Sensor V 1.4 V 1.5 V Coolant Temperature °C *°C *°C Continued on next page JC89288,00001A8 –19–01MAY06–2/3 9015 20 25 Tech 2 Data Read out Item Measured in Engine off, key on Engine on, key on System Voltage V 24.8 V 27.0 V Main Relay Voltage V 24.5 V 27.0 V Desired Engine Speed rpm 499 rpm 499 rpm Engine Speed rpm 0 rpm 900 rpm Accelerator Pedal Position 1 Sensor V 0.0 V 0.0 V Accelerator Pedal Position 2 Sensor V 0.0 V 0.0 V Accelerator Pedal Position Signal % 0.0% 0.0% Fuel Rail Pressure Difference (Actual—Desired) MPa -50 MPa 0-1 MPa Fuel Rail Pressure Sensor V 0.9 V 2.0 V Rail Pressure Feedback Mode Wait Mode Feedback Mode Coolant Temperature Sensor V 1.4 V 1.5 V Coolant Temperature °C *°C *°C