Theory of Operation Travel Flow Combiner Pilot Valve (SL)— Travel flow combiner pilot valve is shifted by pilot oil pressure (51) from right travel to port L (right reverse) or port K (right forward) and through the shuttle valves. The pilot valve then routes control pressure pilot oil (54) from the swing park brake release pilot valve to the travel flow combiner valve in the control valve. The control pressure pilot oil is from the pilot shutoff solenoid valve port A4 to the pilot signal manifold through port PI. See Travel Flow Combiner Valve Operation.
(Group 9025-05.) T149303 –UN–19DEC01 Travel Flow Combiner Pilot Valve 51—Pilot Oil Pressure 52—To Hydraulic Oil Tank 53—To Travel Flow Combiner Valve 54—Control Pressure Pilot Oil 55—Spring MM61211,0001519 –19–16MAY08–6/10 TM2361 (24JUN08) 9025-05-20 450DLC Excavator Operation and Tests 062608 PN=658 Swing Park Brake Release Pilot Valve (SH)—Swing park brake release pilot valve is shifted by pilot oil –UN–19DEC01 pressure (51) from boom up to port A, boom down to port B, arm out to port C, arm in to port D, bucket curl to port G, bucket dump to port H, or auxiliary to port M or N and through the shuttle valves.
The pilot valve routes control T149303 pressure pilot oil (54) out port SH to the swing motor park brake piston through port SH. The control pressure pilot Swing Park Brake Release Pilot Valve oil is from the pilot shutoff solenoid valve port A4 to the pilot signal manifold through port PI. See Swing Motor 51—Pilot Oil Pressure 52—To Hydraulic Oil Tank Park Brake Release Circuit Operation. (Group 9025-05.) 9025 05 20 53—To Travel Flow Combiner Valve 54—Control Pressure Pilot Oil 55—Spring Continued on next page MM61211,0001519 –19–16MAY08–7/10