John Deere 450DLC — Pilot Operation of Control Valve Operation

TM2361 (24JUN08) 9025-05-27 450DLC Excavator Operation and Tests 062608 PN=665 Theory of Operation B33—Swing Pressure Sensor Y24—Power Dig Solenoid 75—Travel Flow Combiner 113—Swing Spool B50—Arm Out Pressure Valve (SG) Valve Pilot Valve (port SL) 118—Arm 1 Spool Sensor Y25—Travel Speed Solenoid 85—Main Relief and Power 119—Check Valve B51—Arm In Pressure Sensor Valve (SI) Digging Valve 120—Arm Reduced Leakage B52—Boom Up Pressure 1—Boom Up Function 89—Travel Flow Combiner Valve—Check Valve Sensor 4—Arm In Function Valve 121—Arm Reduced Leakage B53—Boom Down Pressure 11—Right Travel Forward 90—Right Travel Spool Valve—Switch Valve Sensor Function 94—Bucket Spool 126—Boom 2 Spool B54—Bucket Curl Pressure 27—Pilot Pump 99—Boom 1 Spool 136—Auxiliary Function Flow Sensor 59—Boom Up Shockless Valve 102—Boom Reduced Leakage Combiner Valve B55—Bucket Dump Pressure 62—Bulkhead Valve—Switch Valve 137—Auxiliary Spool Sensor 63—Travel Sensor Manifold 103—Boom Reduced Leakage 140—Left Travel Spool B56—Travel Right Pressure 65—Digging Sensor Manifold Valve—Check Valve 154—Swing Park Brake Pilot Sensor (port TR) 66—Pilot Signal Manifold 104—Check Valve Valve (port SH) B57—Travel Left Pressure 67—Boom Down Shockless 107—Arm 2 Spool 164—To Travel Speed Selector Sensor (port TR) Valve 110—Bypass Shutoff Valve Valve Y22—Boom Flow Rate 71—Arm 2 Flow Rate Pilot 111—Arm Regenerative 182—Pilot Oil Solenoid Valve (SF) Valve (port SK) Valve—Switch Valve Y23—Boom Mode Solenoid Valve (SC) The pilot valves control pressure oil from the pilot The following valves in the control valve are controlled pump and operates the control valve spools.

The pilot by pilot oil from the pilot control valves and pilot valves control valve and travel pilot control valves are in the pilot signal manifold: connected to the control valve by lines through the pilot signal manifold (66). Actuating a pilot control Valve Control Circuit valve routes pilot oil (147) through the pilot signal manifold to the control valve pilot cap to shift a spool. • Auxiliary Flow Combiner Check Valve (136) Pilot oil also flows through the shuttle valves in the • Right and Left Travel Valve Spools (90 and 140) pilot signal manifold and shifts the pilot valves.

The • Bucket Spool (94) boom up shockless valve (59) is built in the signal • Boom 1 and Boom 2 Valve Spools (99 and 126) control valve and dampens quick spool movement. • Arm In Pressure Sensor (B51) The boom down shockless valve (67) located between • Boom Reduced Leakage Valve—Switch Valve (102) the right pilot valve and the signal control valve, also • Boom Reduced Leakage Valve—Check Valve (103) dampens quick spool movement. Boom up function • Arm 1 and Arm 2 Spools (107 and 118) (1), arm in function (4), and right travel forward • Bypass Shutoff Valve (110) function (142) are shown.

• Swing Spool (113) • Arm Regenerative Valve (111) The solenoid valves (Y22—Y25) in the solenoid valve • Arm Reduced Leakage Valve—Check Valve (120) manifold control the main relief and power digging • Boom Up Pressure Sensor (B52) valve, boom flow rate solenoid valve (SF), and boom • Auxiliary Spool (137) mode solenoid valve (SC) in the control valve and the • Travel Flow Combiner Valve (89) travel speed selector valve (164) in the left and right travel motors. Continued on next page LD30992,0000255 –19–25JUN08–2/4 9025 05 27