John Deere 450DLC — Boom Flow Rate Circuit Operation

Theory of Operation Boom Flow Rate Circuit Operation The boom flow rate control valve restricts oil flow rate in the circuit during combined operations, and will give priority to other actuators. LD30992,0000263 –19–26APR06–1/7 TM2361 (24JUN08) 9025-05-87 450DLC Excavator Operation and Tests 062608 PN=725 Each flow rate control valve is operated during a combined operation as shown.

Flow Rate Control Valve Combined Operation Boom Boom Lower (operation with the front attachment above ground [high pressure at the bottom side]) Arm Boom Raise and Arm Roll-In Flow Rate Control Valve Normal Operation—High 180 SUPPLY OIL pressure supply oil (180) flows to the 4-spool side of the 168 parallel circuit from pump 1, (15) and is split into two 182 PILOT OIL directions. One direction high pressure supply oil (180) acts on the check valve in the boom flow rate control 184 RETURN OIL valve—poppet valve (98). In the other direction high 103 pressure supply oil (180) pushes to open the check valve in the boom flow rate control valve—switch valve (97).

104 126 102 High pressure supply oil from pump 1, (15) is blocked at the boom flow rate control valve—switch valve (97) when 99 kept closed, which will push the check valve in the boom flow rate control valve—poppet valve (98) open to allow 98 high pressure supply oil (180) flow to boom 1 spool (99).

–UN–20MAR06 97 15—From Pump 1 97—Boom Flow Rate Control Valve—Switch Valve TX1005027 98—Boom Flow Rate Control Valve—Poppet Valve 99—Boom 1 Spool 15 TX1005027 102—Boom Reduced Leakage Valve—Switch Valve 103—Boom Reduced Leakage Valve—Check Valve Flow Rate Control Valve Normal Operation 104—Check Valve 126—To Boom 2 Spool 168—Boom Cylinder (2 used) 180—Supply Oil 182—Pilot Oil 184—Return or Pressure-Free Oil Continued on next page LD30992,0000263 –19–26APR06–2/7 9025 05 87