TM2361 (24JUN08) 9025-15-9 450DLC Excavator Operation and Tests 062608 PN=759 Diagnostic Information 3 Fan Drive Control Pressure Check 1 2 TX1006258 –UN–12APR06 Fan Pump 1—Fan System Control Pressure Hose 2—Fan Pump Perform Fan Drive Pump Torque Control Test and Adjustment. (Group 9025-25.) Remove control pressure hose (1). Install tee and pressure gauge control pressure hose. Run engine at fast idle with harness connector removed from fan control solenoid valve Is fan drive pressure at test specifications? YES: Repair or replace fan pump control solenoid. See Fan Drive Remove and Install. (Group 3360.). NO: Go to Fan Pump Flow Check.
– – –1/1 4 Fan Pump Flow Check Perform Fan Pump Flow Test. (Group 9025-25.) Measure fan pump flow. Does fan pump flow meet test specification? YES: If fan pump flow is ok and fan speed still slow, replace fan motor. See Fan Motor Remove and Install. (Group 3360) NO: Inspect and repair fan drive pump. See Fan Drive Pump Remove and Install. (Group 3360.) – – –1/1 9025 15 9 5 Oil Cooler Bypass Valve Check See Oil Cooler Bypass Valve Remove and Install. (Group 3360.) Inspect oil cooler bypass valve. Does oil cooler bypass valve operate correctly? YES: Go to Machine Lift Capacity Check. NO: Replace oil cooler bypass valve.
– – –1/1 6 Machine Lift Capacity Check Check machine lift capacity, see Operator’s Manual lift charts. Is amount of weight being lifted within machine lift capacity? YES: Go to Main Relief and Power Digging Valve Setting Check. NO: Reduce amount of weight being lifted. – – –1/1